2020 Airush Razor V9 Kiteboarding Kite



2020 Airush Razor V9 Kiteboarding Kite

 Available Sizes:7m I 8m I 9m I 10m | 11m I 13m | 15m

  • Unrivalled unhooked performance & precision.
  • New generation 5 line freestyle & big air blend.
  • Increased boosting in smaller sizes.

 

 

 

 

AIRUSH LOAD FRAME V4 featuring WebTech

The Airush Load Frame featuring WebTech has been the key to setting the ultimate benchmark in durability, without compromising on weight. By expanding our exclusive Load Frame with WebTech throughout the areas normally occupied by Dacron, we are able to minimize or completely remove the heavier fabric and utilize the Ballistic high-modulus polyethylene web fibers instead – increasing strength and minimizing weight.

INTEGRATED HIGH MODULUS POLYETHYLENE YARNS

Central to the concept of the Load Frame are the lightweight Ultra High Modulus yarns, of which each single yarn can carry 40kg. Think of them as a lightweight web with engineered energy absorption under load, similar to a spider web. These yarns are integrated into the canopy through reinforced taping that allows them to elongate when under extreme load, absorbing most of the shock that traditionally would have run through the canopy. At the same time, they carry the primary load of the canopy, preventing stretch and increasing long-term performance.

TECHNOFORCE D2

This premium fabric is used in conjunction with the Airush Load Frame for the ultimate combination of durability and performance. Ongoing testing has highlighted the lowest stretch and UV Stability, along with the highest long-term reliability of any fabric available.

XL INFLATE/DEFLATE VALVE

The XL inflate/deflate valve features an insanely easy and fast way to inflate and deflate your kite. The large opening creates maximum flow of air and reduces fatigue and stress on your pump. This in conjunction with the Airush high-velocity pump makes inflating your kite extremely fast to get you on the water as quickly as possible.

AIRUSH BUMPERS

Airush bumpers are found throughout the leading edge of the kites to reduce wear and increase durability on rough surfaces. These bumpers are key for increasing the lifespan of Airush kites.

KEVLAR REINFORCEMENT

Kevlar, found in bullet proof vests, is found throughout the Airush kites. These Kevlar Reinforcements are only put in the most critical areas to protect from wearing while still minimizing weight which affects the kites performance

SPS & FBI

The oversized SPS valve (Single Point Inflation System) optimizes inflation and deflation. The Fast Bladder Inflation (FBI) features increased wall thickness and oversized diameter tubing, thus eliminating tube kink, reducing stress on your pump, and enabling quick and easy inflation. The SPS cover supports the tubing, further limiting UV damage to the material and preventing over flexing when packing.

TURNING SPEED

The rear lines on the Razor affect turning speed of the kite. By moving the rear lines towards the leading edge, the Razor becomes static and stable, perfect for wakestyle moves. Moving the rear lines towards the trailing edge allows the razor to move extremely quick, perfect for boosting and kitelooping. The number of attachments vary based on Razor specific size.

5TH LINE

The 5th line featured on the 2020 Airush Razor V9 is the only method of support to maximize the performance of a dedicated C-kite. The support from the 5th line allows for a finer leading edge, giving the Razor the ultimate combination of speed, pop and slack for unhooked tricks.

RECYCLED POLYESTER KITEBAG

Around 36 billion plastic bottles are produced every year, and more than 30% of non-recycled plastics will end up in the rivers or oceans. Consider this, and remember that these waterways are our playground. We have teamed up with one of the leaders in recycled plastic, and now we produce many of our kitebags and key accessories in collaboration with Waste 2 Wear. Waste 2 Wear recycle 100% post-consumer plastic bottles into Eco-friendly fabrics. This unique process involves turning environmentally damaging waste into usable, sustainable yarns. The recycled yarns are then combined with natural fibers to be woven or knitted into Eco-friendly fabrics, suitable for garments, home textiles and accessories.

2020 AIRUSH PROGRESSION BAR V3 

  • Reliable & easy to use control system.
  • Compatible with all 4 line Airush kites.
  • Easy to reach color coded Pull-Pull tabs.

 The Progression Bar is a no fuss, easy to use, and reliable Pull-Pull control system. With industry standard safety and strength, the Progression bar features 45-52cm adjustable bar ends, which allows it to be used on any Airush 4 line kite. Together with 24m flying lines (with 10m and 14m extensions), the Progression Bar complies with IKO and BKSA teaching standards with the Low Y on the center lines – allowing for a quick single line flag out.

BAR LENGTH:
45cm – 52cm Adjustable.
4 Line Bar. 

LINE LENGTH:
24m total = 1m leader lines + 9m lower lines + 14m upper lines

KEY FEATURES:
Easy to reset IQR.
Short leash with clips. 
Adjustable bar ends.

 

2020 AIRUSH CLEAT BAR V4 50-60CM

  • Simple, neat & durable control system.
  • Full trim availability with minimum clutter.
  • Velcro pull strap for securing the trim tail.

The Cleat Bar enables you to control exactly how much you want to power up or depower your kite, and features a directional grooving pattern that helps you hang on through all conditions with maximum grip and comfort. The PU coated depower line, with reduced diameter tubing, makes sheeting in and out reliable and effortless.

KEY FEATURES:
Short leash with clips. 
Updated Modus 2.0 Bar ends.
Medium harness loop.

BAR LENGTH:
50cm – 60cm Adjustable. 
4 Line Bar. 

LINE LENGTH:
24m total = 1m leader lines + 20m lower lines + 3m upper lines.

WMFG KITEBOARD PUMP 1.0R

PRODUCT DESCRIPTION:

Newly engineered seals and pistons combined with newly molded handle and feet offer improved ergonomics and inflation speed. Single- to double-stroke inflation switch allows for instant change from high-volume / low-pressure inflation to low-volume / high-pressure. Custom WMFG kite tether and hook, kite-tuned WMFG pressure gauge, integrated sand filter, premium high-flow and extra durable hose with new threaded fitting, and the widest range of kite nozzles of any pump on the market make this the finest standard-height pump ever produced. Not recommended for inflation higher than 13 PSI. SUP nozzle sold separately. 

FEATURES;

  • Premium Standard-Size / Travel Kiteboard Pump
  • Height: 20" / 50.8 cm (Industry Standard)
  • Diameter: 4" / 10cm
  • Capacity: 2.3L/Stroke

 WMFG Kiteboard Pump 1.0R



Related Items