2020 North Chase Foilboard

Call For Availability (631) 691-0793

2020 North Chase Foilboard

Available Sizes: 5'2" x 18.5" x 2.25" 24.3L


Travel light and ready for action with the 3-in-1 North Chase, your ultimate single board quiver. A high-performance kitesurf board, kitefoil board and prone foilsurf board, with reinforced built-in foil connection and FCSII thruster finboxes, so you're ready to chase the elements in every condition.


    • Forgiving length generous volume and width.

      In kitesurf mode delivers effortless upwind speed and provides powerful pop for freestyle tricks.
    • Grabbable rails

      For easy air-handling and cushy contoured deck pads for enhanced control.
    • The Ultimate 1-board Quiver

      Kitefoil, Foilsurf or Kitesurf.
    • Low flat skate rocker

      Gives instant speed and drive off the back foot for optimal upwind performance
    • Four-point screw-in connection system

      Provides a stable base for efficient load transfer and quick setup. Bolt pattern 165mm x 90mm.
  • Scooped nose for easy recovery.
  • Carbon Innegra Futurelite system maximises strength without losing flex
  • Integrated FCSI & FCS II compatible Fin Boxes
  • Fitted with thruster fins The Chase transforms into an all terrain, wave and freestyle kitesurf board that does it all

Package Includes

  • Board
  • Free Surf Strap Set
  • Foil Mounting Hardware
  • Tri FCS1 Fin Set



      Experience instant planing in full comfort with our lightweight memory foam Surf Straps. The Free Straps allow you to customise your fit and stance, giving you freedom to move and shred in any conditions.


      • KnitFlex

        Comfortlightweight neoprene bonded with pre-shaped dual density memory foam and contoured for maximum comfort. Stitch free lining means no rubbing or pressure points.
      • Centred strap configuration

        Allows entry from either rail, for switching stance.
      • Freedom within the footstrap

        Tighten attachment screws firmly for a more locked-in feeling, or back the screws off slightly for more movement and a looser feel when riding.
      • Micro strap adjustment capabilities

        Asymmetric strap washers allow you washer 180 degrees to loosen or tighten the strap without repositioning.
      • Range of foot strap positions

        Wide stance for increased control when surfing, through to a narrower, more locked in freeride stance.

      Package Includes

      • Pair of Straps
      • Mounting Hardware


      850 WING + 85 MAST


      • Carbon 850 Front Wing
        Lightweight carbon sandwich construction with optimized profile and rounded outline for a playful and smooth ride without losing top speed thrills.
      • Maximum freeride performance
        Carries the lift through all manouevres and lets you step up your foil game with ease.
      • Anhedral wing profile
        With swept back outline allows for a more agile flight mode and roll stability during maneuvres.
      • Optimized low drag
        Foil section allows for thrilling top end speeds combined with unbelievable low stall speed.
      • Composite rear-wing Stabilizer
        In perfect harmony with the Front Wing, our dihedral-shaped rear Stabilizer provides control and riding comfort, allowing fast pivoting turns and easy recovery from surface-breaching.
      • Breach Recovery
        Surface piercing of the Stabilizer is not a problem, as the Front Wing sits deeper in the water and is still fully submerged, giving you that extra time to react and adjust your ride height.
      • Hydrodynamically-optimized Fuselage
        Precisely CNC-machined from 6061-T6 anodized aeronautical-grade aluminium for minimum resistance, with structurally engineered connections for an exceptional strength to weight ratio.
      • 85cm Aluminium Mast
        Ideal for Freeride foiling and increases overall ride performance in choppy conditions. This Mast length is perfect to heel over more, fly the kite lower and further power up the foil system for a more controlled high speed ride. It is also more forgiving in rougher conditions. Constructed from the highest quality aircraft grade 6061-T6 Anodized Aluminium.
      • GeoLock
        Engineered to last, our unique GeoLock tapered geometry locking system provides a more effective load-bearing connection between the Mast and Fuselage, locking them together, so they feel like one piece. Screws engage the GeoLock while load transfer now takes place over the full cross-section of the mast profile, allowing for a more efficient load transfer and longer-lasting connection.
      • Board Adapter
        The Sonar Foil System is connected to the board by a lightweight CNC-machined aluminium Board Adapter with a tapered geometry locking connection that engages with the mast. Fusing Board Adapter and mast together to build one union for optimum load transfer and a stronger, more direct feeling and steering impulse when foiling.
      • 165x90mm bolt pattern
        The Sonar Foil System can be mounted to any foil board with a 165x90mm bolt pattern. Foil to Board mounting hardware is not included with the Sonar Edition. All North Foil Boards include foil to board mounting hardware. For non-North Foil Boards, mounting hardware can be purchased separately from our online store or your local North Kiteboarding retailer.

      Package Includes

      • 850 Front Wing
      • Rear Wing Stabilizer
      • 85cm Mast
      • Fuselage
      • Plate Board Adapter
      • Foil Tool Set and Foil Screw Packs A, B, C and D
      • Mast covers and Track Board Mounting Hardware Sold Separately

      2020 North Sonar Freeride Edition Complete Foil


      1650 WING + 70 MAST


      Carbon 6061-T6 Aluminum Composite


      • Designed for maximum freeride performance. The Sonar 850 carries the lift through all maneuvers and lets you step up your foil game with ease.
      • Anhedral wing profile and swept back outline allows for a more agile flight mode and roll stability during maneuvers.
      • Optimized low drag foil section allows for thrilling top end speeds combined with unseen low stall speed.
      • Lightweight Carbon Sandwich Construction
      • The 85cm Mast is ideal for freeride foiling and increases overall ride performance. The additional length allows you to heel over more, fly the kite lower and power up more. It is also more forgiving in rougher conditions.
      • The aluminium mast's section profile reflects an optimised balance for strength to weight ratio.
      • GeoLock tapered geometry locking connection for optimised load bearing.
      • Tapered to fit Aluminium Mast to Board Adaptor
      • Arc-shaped rear stabilizer provides control and riding comfort, allowing fast pivoting turns and easy recovery from surface-breaching.
      • Rear-wing stabilizer sits upward facing on top of fuselage for greater structural integrity, undisturbed approaching flow and easy recovery from surface piercing.
      • Delivers a harmoniously balanced ride from the lowest wind speeds right through to the top end.
      • Hydrodynamic fuselage with optimised strength to weight, for a long lasting, well balanced foil with minimum resistance.
      • Hydrodynamically-optimised shape for minimal resistance.
      • CNC-machined anodised aircraft grade 6061-T6 aluminum fuselage.
      • GeoLock transfers the load from the fuselage into the aluminium mast more efficiently for a stronger connection with less flex and a more direct feeling.


      • Sonar 850 Wing
      • 85cm Aluminium Mast
      • Aluminium Fuselage
      • Composite Stabilizer
      • Aluminium Mast To Board Adapter
      • Foil Tool Set
      • Foil Screw Packs A,B,C,D

      2020 North Sonar Surf Edition Complete Foil

      Related Items