2022 Ocean Rodeo Glide HL-Series Wing



2022 Ocean Rodeo Glide A-Series Wing

Available Sizes:3m, 4m,  5m, 6m

Glide HL-Series

Coming straight off the back of the Crave HL-Series kites’ incredible success, it was a no-brainer that our wings would bypass a traditional, industry-standard Dacron build and instead utilize the innovative Hybrid Light system.

Strategically placed ALUULA composite materials are blended with Dacron to create this new hybrid construction class that delivers an impressive decrease in weight with improved airframe response. ALUULA has been inserted into key overlays and reinforcements throughout the wing, while the strut is composed entirely from ALUULA composite material. The full ALUULA strut reduces airframe flex while keeping the centre of gravity forward, resulting in superior handling.

Every Ocean Rodeo Glide wing is fitted with our interchangeable Matrix handle system. Wings come with the Matrix handles pre-installed, yet allow the rider to customize handles and positions at their preference.  

With the HL-Series wings, we didn’t just stop with the implementation of ALUULA... Every single seam and component was reviewed and precision tuned. If any weight savings could be found, we addressed them, while at the same time maintaining our 20-year legacy of producing “Built Tough” products.

 

IMPORTANT NOTICE! 
This Wind range chart is for reference only, calculated for a 75kg / 180lb rider.

Board size, foil size, rider weight, rider skill level and wind / weather / water conditions all must be taken into consideration when selecting a wing size.

SOFT HANDLE SET

Ultra light and strong, the removable Matrix handles shine when wave riding or connecting chop on prolonged downwinders, keeping the trailing edge of the wing as light as possible for the ultimate in drifting performance.
Built tough with ergonomically shaped EVA sheathed by rugged nylon tube webbing.  Handles are connected to the strut by velcro locking tabs which allow the rider to change handles styles and positions. Multiple harness line connection points are made possible via webbing loops located at each handle end.

The Soft Matrix Handles come standard with every Gide.

 

CARBON HANDLE SET

32 cm x 2 (One pair of 32 cm carbon handles will fit all Ocean Rodeo wing sizes.)

Compression molded Carbon, these handles are both strong and lightweight. Featuring a 25 mm diameter embossed grip with non slip finger ridges for extra control.

Swapping a handle set between wing sizes is quick and easy with no screws, velcro or other attachment devices required.

The Carbon handle set comes complete with a padded handle bag.

Available Summer 2022.

ADJUSTABLE CARBON BAR

Available in 2 sizes:

110 cm - fits 4M to 7M

94 cm - fits 2.5M to 5M

Light and strong, made with 12 K twill weave Carbon, the Carbon Bar delivers additional stiffness to the inflatable strut. The ability to generate more power and better manage overpowered situations is enhanced.

Riding with the Carbon Bar is the ultimate setup to get the most out of your Ocean Rodeo wing, allowing for aggressive riding and precision control. No more searching for grab handles during maneuvers!

The generous oval tube diameter delivers exceptional torsional / lateral control during powered maneuvers, while the embossed grip provides a secure connection in all conditions and the adjustable back post makes swapping the bar between sizes quick and easy.

The Carbon Bar comes complete with a padded bar bag that clips to the side of the wing bag.

Available Summer 2022.

HIGH PRESSURE ALUULA STRUT

ALUULA ERGONOMIC SHAPED STRUT

Ergonomically shaped and built entirely out of the ultra light, ultra strong ALUULA composite material, the Glide A-Series’ strut increases profile stability, offers more rigidity and control, while also significantly reducing the weight on the trailing edge of the wing, keeping the strut up when one-handed drifting.

QUAD LOCK SEAMS

Used specifically on the shaping seams of struts, Quad Lock stitching delivers more than twice the strength of standard strut seam constructs, and was another innovation specifically tailored for the ALUULA airframe wings

 LEADING EDGE TECHNOLOGY

ALUULA POWER BAND

band of ALUULA 82gsm composite runs from wing tip to wing tip along the connection seam between the canopy and leading edge. With twice the tensile strength of the underlying Dacron leading edge fabric, the ALUULA strip also stiffens the Dacron leading edge, increasing the Modulus (resistance to stretching while under load), providing increased stability and handling in all conditions.



KNUCKLE SAVER NEOPRENE HANDLE

You know the conditions are good when you chafe your knuckles during long downwind drifts. The leading edge behind the handle is padded with neoprene for improved comfort while the handle itself is stiffened to provide additional control while one handed wave riding.


ALUULA REINFORCED

The canopy's reinforcements, overlays and anti-flutter strips now benefit from ALUULA’s remarkable strength to weight ratio and it's superior abrasion resistance compared to Dacron and other much heavier abrasion solutions.

TEIJIN D2 RIPSTOP CANOPY

Designed specifically for the kiteboarding market, Teijin’s Technoforce D2 ripstop has high tear resistance, low stretch, and is incredibly lightweight.

Each strand of yarn is individually coated before being woven together. A second surface coating is then applied to the material, providing long term endurance.

Teijin D2 is the benchmark in quality with proven superiority in durability and dynamics.


SIGHT WINDOW

Strategically placed for vision when you need it. Perimeters reinforced with ALUULA.

 

INDEPENDeNT STRUT AND LEADING EDGE INFLATION

Individual leading edge and strut inflate / deflate valves specific pressures to be set for each spar. All Ocean Rodeo wings feature an industry-first high pressure strut which is safe at 12psi. Each size of Glide wing has a recommended PSI for the leading edge.

UNITY WRIST LEASH

Included with all Ocean Rodeo wings, the Unity wrist leash is designed not to let go during a flogging.

Featuring:

  • Shock cord loaded Amsteel rope.
  • Double backed wrist leash design to disperse load.
  • Secure loop-to-loop connection to the leading edge of the wing.

Built with the same time-tested materials and zippers as used in our kite bags, our Glide wing bags are built for convenience at the beach and keeping your wing in good shape while stored. 
Featuring:
  • Side gussets to support the bag while inserting the wing.
  • Bungee pump holder.
  • Front stash pocket.
  • Mesh side and bottom panels for accelerated wing drying and sand / debris release.




Related Items