Flysurfer Peak 5 Kiteboarding Kite



Flysurfer Peak 5 Kiteboarding Kite

Available Sizes: 2.5 / 4 / 5 / 6 / 8 / 11 / 13

Freeride, Touring, Progression

This single-skin concept combines our passion for usability and security that will make your outdoor kite experience unforgettable. The best light wind handling and backstall resistance let you set off with ease. Be always prepared for emergencies due to its reliable depower and the B-Safe system. After its activation, you can also use the system for self-landing or take a relaxing break at any time. The pack size allows you to carry several kites in your backpack and react to sudden weather changes. This quick turning, ultra-light kite has an incomparable area of application. Choose it as an incentive to make courageous decisions in life and start your next adventure!

Features

TX-Light Single Skin Concept

The single skin concept has high lift profiles and a very efficient depower. Reducing its weight to a minimum brings advantages in stability, drift and light wind handling. Single skins allow the use of our B-Safe system and absorb hard impacts. The excellent longevity of these kites is not only due to the concept but by their material. High ageing and tear resistance, three ripstop threads and enormous rigidity at only 33g / m² make the TX-Light the perfect fabric. The leading edge consists of 44g / m² DLX + fabric which better protects against abrasion and sharp-edged objects. Every material optimizes a specific area of the kite. Every fabric is optimized for its use, from UV-resistant surfaces and air-impermeable coatings to absorbent properties to improve airflow when wet.

Hybrid Wingtip Technology

The Hybrid Wingtip Technology consists of two self-inflating cells on each side of the kite. The openings are protected with mesh material to prevent the entry of snow or dirt. Both wingtips have our proven drainage system. The more efficient aerodynamics allow for tighter turning with constant pull, as well as increased backstall resistance. Through that, the wingtip is only flapping when you depower the kite. The bar feedback is considerably improved. The kite feels sporty and gives you a confidence-inspiring feeling.

B-Safe System

The B-Safe System is a (extra optional Y-) line configuration that slides along the B-level through eyelets. After activating the quick release, the bar moves 3 m up on the 5th line. The kite is reefed horizontally in the middle and reduces the wing span to a minimum. The kite comes down gently and flags out. After reactivating the quick release system, you can launch the kite through the power zone. The B-Safe System is ideal for self-landing or for taking breaks.

Camber Trim System

Bridle levels of the kite are controlled by the mixer, a pulley system which modulates the angle of attack and the profile camber. The mixer features the two-ring camber trim system. Moving the rings changes the relationship between the B or C level relative to the A level. The profile of the foil kite can be trimmed to be either flat or curved.

 



The wind range chart is to be used as a point of reference. It is based on a rider who weighs around 75kg (165lbs.) Actual use will vary depending on your weight, skill level, board size/type (twintip or hydrofoil) and wind conditions on water or land. When choosing a kite size, always use common sense and repeatedly choose a smaller size if you are not sure, especially when using the kite on land.



Related Items